Created to perform when the heat is on
During use, some electronic components can generate significant amounts of heat. Failure to effectively dissipate this heat away from the component and the device can lead to reliability concerns and reduced operational lifetimes. Electrolube’s extensive Thermal Interface Material (TIM) Range is designed to help reduce the operating temperature of many different electronic devices. With any thermal application we would always advise testing before final selection as the requirements and operating environment will vary for each application.More info > Download product selector chart > Download product brochure >
Newton’s law of cooling states that the rate of loss of heat is proportional to the temperature difference between the body and its surroundings. Therefore, as the temperature of the component increases and reaches its equilibrium temperature, the rate of heat loss per second will equate to the heat produced per second within the component. This temperature may be high enough to significantly shorten the life of the component or even cause the device to fail. It is in such cases that thermal management measures need to be taken. The same considerations can be applied to a complete circuit or device which incorporates heat producing individual components.
Heat is lost from a component to its surroundings at the surface of the component. The rate of loss of heat will increase with the surface area of the component; a small device producing 10 watts will reach a higher temperature than a similar powered device with a larger surface area.
This is where heat sinks are used – varying in size and shape, heat sinks can be designed to offer a significantly increased surface area to maximise heat dissipation. They are typically connected to components which generate a large amount of thermal energy when used and therefore dissipate such energy away from the device to avoid failure due to over-heating.
Heat sinks have proven to be very effective over the years however in order to ensure full contact and therefore maximum efficiency, thermal management products are used alongside.
Metal surfaces, even when polished to a fine degree, have a certain amount of roughness. It can therefore be deduced that when two metal surfaces are placed together contact is not 100% and there will always be an air gap between the two surfaces. The use of a thermal interface material between such gaps ensures complete contact between the two surfaces and in turn more efficient heat conductance.
The ongoing trend for product miniaturisation – coupled with more modern, higher powered devices – has ensured that efficient thermal management is an essential part of both modern and future electronics design, the LED lighting market being just one example. Thermal management products are also offering solutions for greater efficiency in green energy development; photovoltaic inverters – which are known to be particularly sensitive to temperature; connections between the heat-pipe and water storage tank for solar-heating applications; hydrogen fuel cells; wind power generators, are just a few examples.
Product code: TPM35001K
TPM350 is one of Electrolube's latest high-performance product innovations in our thermal interface material range.
It is designed for easy application via screen printing, containing a small amount of solvent which evaporates after application to leave a cured material in place. This eliminates the mess associated with thermal pastes or greases. The material changes viscosity (phase change) once it reaches its activation temperature of 50°C ensuring efficient thermal transfer during operating conditions, minimizing contact thermal resistance, and returning to its cured state once it cools down again.
This phase change allows for a vast array of application scenarios while it also has an exceptional thermal conductivity value of 3.5W/m.K.
With thermal interface materials, every application is different and one should not rely solely on the TDS to compare products. If you have any concerns or questions, please don't hesitate to get in touch with our technical support team.
Log into our MSDS database for Safety Data Sheets: MSDS